RISC-V 测试矩阵Alpine @ Banana Pi BPI-F3 测试报告
支持状态
BASIC
系统版本
edge
最后更新
2024-12-10
Alpine 香蕉派 BPI-F3 测试报告
测试环境
系统信息
- 下载链接：https://dev.alpinelinux.org/~mps/riscv64/
- 参考安装文档：https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3
硬件信息
- 香蕉派 BPI-F3
- 电源适配器
- microSD 卡一张
- USB to UART 调试器一个
安装步骤
刷写镜像（sd 卡）
下载并解压镜像后，使用 dd 将镜像写入 microSD 卡。
xz -kd bpi-f3-mmc.img.xz
sudo dd if=/path/to/bpi-f3-mmc.img of=/dev/your-device bs=1M status=progress登录系统
通过串口登录系统。
显示：[press ENTER to login] 后按回车登录进入root用户
预期结果
系统正常启动，能够通过板载串口登录。
实际结果
系统正常启动，成功通过板载串口登录。
启动信息
屏幕录像（从刷写镜像到登录系统）：
Welcome to Alpine Linux 3.21.0_alpha20240807 (edge)
Kernel 6.6.36-2-bpi-f3 on an riscv64 (ttyS0)
Welcome to Alpine!
The Alpine Wiki contains a large amount of how-to guides and general
information about administrating Alpine systems.
See <https://wiki.alpinelinux.org/>.
You can setup the system with the command: setup-alpine
localhost:~# uname -a
Linux localhost 6.6.36-2-bpi-f3 #3-Alpine SMP Wed, 18 Sep 2024 13:41:15 +0000 riscv64 Linux
localhost:~# cat /etc/os-release
NAME="Alpine Linux"
ID=alpine
VERSION_ID=3.21.0_alpha20240807
PRETTY_NAME="Alpine Linux edge"
HOME_URL="https://alpinelinux.org/"
BUG_REPORT_URL="https://gitlab.alpinelinux.org/alpine/aports/-/issues"
localhost:~# cat /proc/cpuinfo
processor : 0
hart : 0
model name : Spacemit(R) X60
isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt
mmu : sv39
mvendorid : 0x710
marchid : 0x8000000058000001
mimpid : 0x1000000049772200
processor : 1
hart : 1
model name : Spacemit(R) X60
isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt
mmu : sv39
mvendorid : 0x710
marchid : 0x8000000058000001
mimpid : 0x1000000049772200
processor : 2
hart : 2
model name : Spacemit(R) X60
isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt
mmu : sv39
mvendorid : 0x710
marchid : 0x8000000058000001
mimpid : 0x1000000049772200
processor : 3
hart : 3
model name : Spacemit(R) X60
isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt
mmu : sv39
mvendorid : 0x710
marchid : 0x8000000058000001
mimpid : 0x1000000049772200
processor : 4
hart : 4
model name : Spacemit(R) X60
isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt
mmu : sv39
mvendorid : 0x710
marchid : 0x8000000058000001
mimpid : 0x1000000049772200
processor : 5
hart : 5
model name : Spacemit(R) X60
isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt
mmu : sv39
mvendorid : 0x710
marchid : 0x8000000058000001
mimpid : 0x1000000049772200
processor : 6
hart : 6
model name : Spacemit(R) X60
isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt
mmu : sv39
mvendorid : 0x710
marchid : 0x8000000058000001
mimpid : 0x1000000049772200
processor : 7
hart : 7
model name : Spacemit(R) X60
isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt
mmu : sv39
mvendorid : 0x710
marchid : 0x8000000058000001
mimpid : 0x1000000049772200
localhost:~# setup-alpine
ALPINE LINUX INSTALL
----------------------
Hostname
----------
Enter system hostname (fully qualified form, e.g. 'foo.example.org') [localhost]
Interface
-----------
Available interfaces are: eth0 eth1 ip6tnl0 sit0 tunl0.
Enter '?' for help on bridges, bonding and vlans.
Which one do you want to initialize? (or '?' or 'done') [eth0]
Ip address for eth0? (or 'dhcp', 'none', '?') [dhcp]
Available interfaces are: eth1 ip6tnl0 sit0 tunl0.
Enter '?' for help on bridges, bonding and vlans.
Which one do you want to initialize? (or '?' or 'done') [eth1] done
Do you want to do any manual network configuration? (y/n) [n]
[ 182.914702] priv phy_interface = 9
[ 183.008444] emac_phy_connect: eth0: attached to PHY (UID 0x1cc916) Link = 0
[ 183.035905] k1x_emac cac80000.ethernet eth0: registered PTP clock
udhcpc: started, v1.36.1
udhcpc: broadcasting discover
udhcpc: broadcasting discover
[ 187.145641] k1x_emac cac80000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
udhcpc: broadcasting discover
udhcpc: broadcasting select for 192.168.5.221, server 192.168.5.1
udhcpc: lease of 192.168.5.221 obtained from 192.168.5.1, lease time 43200
Root Password
---------------
Changing password for root
New password:
Bad password: too short
Retype password:
passwd: password for root changed by root
Timezone
----------
Africa/ Egypt Iran Poland
America/ Eire Israel Portugal
Antarctica/ Etc/ Jamaica ROC
Arctic/ Europe/ Japan ROK
Asia/ Factory Kwajalein Singapore
Atlantic/ GB Libya Turkey
Australia/ GB-Eire MET UCT
Brazil/ GMT MST US/
CET GMT+0 MST7MDT UTC
CST6CDT GMT-0 Mexico/ Universal
Canada/ GMT0 NZ W-SU
Chile/ Greenwich NZ-CHAT WET
Cuba HST Navajo Zulu
EET Hongkong PRC leap-seconds.list
EST Iceland PST8PDT posixrules
EST5EDT Indian/ Pacific/
Which timezone are you in? [UTC]
* WARNING: clock skew detected!
* Stopping local ... [ ok ]
* Stopping System Message Bus ... [ ok ]
* Seeding random number generator ...
* Saving 256 bits of creditable seed for next boot [ ok ]
* WARNING: clock skew detected!
* Starting busybox acpid ... [ ok ]
* Starting chronyd ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting busybox crond ... [ ok ]
* Starting System Message Bus ... [ ok ]
* Starting local ... [ ok ]
Proxy
-------
HTTP/FTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
Network Time Protocol
-----------------------
Sat Jan 1 00:03:24 UTC 2000
Which NTP client to run? ('busybox', 'openntpd', 'chrony' or 'none') [chrony]
* rc-update: chronyd already installed in runlevel `default'; skipping
* WARNING: chronyd has already been started
APK Mirror
------------
(f) Find and use fastest mirror
(s) Show mirrorlist
(r) Use random mirror
(e) Edit /etc/apk/repositories with text editor
(c) Community repo enable
(skip) Skip setting up apk repositories
Enter mirror number or URL: [1]
(f) Find and use fastest mirror
(s) Show mirrorlist
(r) Use random mirror
(e) Edit /etc/apk/repositories with text editor
(c) Community repo enable
(skip) Skip setting up apk repositories
Enter mirror number or URL: [1] skip
User
------
Setup a user? (enter a lower-case loginname, or 'no') [no]
Which ssh server? ('openssh', 'dropbear' or 'none') [openssh]
Allow root ssh login? ('?' for help) [prohibit-password]
Enter ssh key or URL for root (or 'none') [none]
* service sshd added to runlevel default
ssh-keygen: generating new host keys: RSA ECDSA ED25519
* Starting sshd ... [ ok ]
Disk & Install
----------------
Available disks are:
mmcblk2 (15.6 GB )
Which disk(s) would you like to use? (or '?' for help or 'none') [none]
findfs: unable to resolve 'LABEL=APKOVL'
Enter where to store configs ('floppy', 'usb' or 'none') [none]
Enter apk cache directory (or '?' or 'none') [/var/cache/apk]
测试判定标准
测试成功：实际结果与预期结果相符。
测试失败：实际结果与预期结果不符。
测试结论
成功
来源: 支持矩阵