RuyiSDK
← Back to VisionFive 2
Fedora @ VisionFive 2 Test Report
System Version
41
Status
GOOD
Last Update
2025-01-19
Fedora VisionFive 2 Test Report
Test Environment
System Information
- System Version: Fedora 41
- Download Link: https://mirror.iscas.ac.cn/fedora-riscv/dl/StarFive/visionfive2/images/latest/fedora-disk-multi-desktops_starfive_vf2-sda.raw.gz
- Reference Installation Document: https://images.fedoravforce.com/how-to-burn-images-to-sd-cards
Hardware Information
- Starfive VisionFive 2
- Power Adapter
- A microSD Card
- A microSD Card reader
- A USB to UART Debugger
Installation Steps
Flash the Image to SD Card
After downloading and extracting the image, use dd to flash the image to the microSD card.
wget https://mirror.iscas.ac.cn/fedora-riscv/dl/StarFive/visionfive2/images/latest/fedora-disk-multi-desktops_starfive_vf2-sda.raw.gz
gzip -d fedora-disk-multi-desktops_starfive_vf2-sda.raw.gz
sudo dd if=fedora-disk-multi-desktops_starfive_vf2-sda.raw of=/dev/your-device bs=4M status=progressLogging into the System
Logging into the system via the serial port.
Default Username: root
Default Password: riscv
Expected Results
The system should boot up normally and allow login through the onboard serial port and through GUI.
Actual Results
The system booted successfully and login through the onboard serial port as well as the GUI was successful. The GUI desktop works gracefully.
Boot Log
Note that the default GUI desktop environment offered in this image is LXDE.
[ 47.258002] broken atomic modeset userspace detected, disabling atomic
[ 47.616949] starfive-eth-plat 16040000.ethernet: Failed to reset the dma
[ 47.623679] starfive-eth-plat 16040000.ethernet end1: stmmac_hw_setup: DMA engine initialization failed
[ 47.633130] starfive-eth-plat 16040000.ethernet end1: stmmac_open: Hw setup failed
[ 47.780845] starfive-eth-plat 16040000.ethernet end1: PHY [stmmac-1:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[ 48.265884] starfive-eth-plat 16040000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 49.276978] starfive-eth-plat 16040000.ethernet: Failed to reset the dma
[ 49.283696] starfive-eth-plat 16040000.ethernet end1: stmmac_hw_setup: DMA engine initialization failed
[ 49.293154] starfive-eth-plat 16040000.ethernet end1: stmmac_open: Hw setup failed
[ 49.323544] starfive-eth-plat 16040000.ethernet end1: PHY [stmmac-1:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[ 49.334577] starfive-eth-plat 16040000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 50.347902] starfive-eth-plat 16040000.ethernet: Failed to reset the dma
[ 50.354665] starfive-eth-plat 16040000.ethernet end1: stmmac_hw_setup: DMA engine initialization failed
[ 50.364205] starfive-eth-plat 16040000.ethernet end1: stmmac_open: Hw setup failed
[ 50.389657] starfive-eth-plat 16040000.ethernet end1: PHY [stmmac-1:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[ 50.400462] starfive-eth-plat 16040000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 50.856949] dwmac4: Master AXI performs fixed burst length
[ 50.862465] starfive-eth-plat 16040000.ethernet end1: No Safety Features support found
[ 50.870429] starfive-eth-plat 16040000.ethernet end1: IEEE 1588-2008 Advanced Timestamp supported
[ 50.879776] starfive-eth-plat 16040000.ethernet end1: configuring for phy/rgmii-id link mode
Welcome to the Fedora RISC-V disk image
https://openkoji.iscas.ac.cn/koji/
Build date: Fri Jul 12 11:45:54 UTC 2024
Kernel 5.15.0 on an riscv64 (ttyS0)
The root password is 'riscv'.
root password logins are disabled in SSH starting Fedora.
If DNS isn’t working, try editing ‘/etc/yum.repos.d/fedora-riscv.repo’.
For updates and latest information read:
https://fedoraproject.org/wiki/Architectures/RISC-V
Fedora RISC-V
-------------
fedora-riscv login: root
Password:
[root@fedora-riscv ~]# uname -a
Linux fedora-riscv 5.15.0 #2 SMP Thu Jun 20 02:20:24 EDT 2024 riscv64 GNU/Linux
[root@fedora-riscv ~]# cat /etc/os-release
NAME="Fedora Linux"
VERSION="41 (Xfce Prerelease)"
ID=fedora
VERSION_ID=41
VERSION_CODENAME=""
PLATFORM_ID="platform:f41"
PRETTY_NAME="Fedora Linux 41 (Xfce Prerelease)"
ANSI_COLOR="0;38;2;60;110;180"
LOGO=fedora-logo-icon
CPE_NAME="cpe:/o:fedoraproject:fedora:41"
DEFAULT_HOSTNAME="fedora"
HOME_URL="https://fedoraproject.org/"
DOCUMENTATION_URL="https://docs.fedoraproject.org/en-US/fedora/rawhide/system-administrators-guide/"
SUPPORT_URL="https://ask.fedoraproject.org/"
BUG_REPORT_URL="https://bugzilla.redhat.com/"
REDHAT_BUGZILLA_PRODUCT="Fedora"
REDHAT_BUGZILLA_PRODUCT_VERSION=rawhide
REDHAT_SUPPORT_PRODUCT="Fedora"
REDHAT_SUPPORT_PRODUCT_VERSION=rawhide
SUPPORT_END=2025-05-13
VARIANT="Xfce"
VARIANT_ID=xfce
[root@fedora-riscv ~]# Test Criteria
Successful: The actual result matches the expected result.
Failed: The actual result does not match the expected result.
Test Conclusion
Test successful.
Source: Support Matrix