RuyiSDK System Version
20250527
Status
BASIC
Last Update
2025-05-29
openKylin 2.0 SP1 Milk-V Mars Test Report
Test Environment
Operating System Information
- System Version: openSUSE Tumbleweed 20250527
- Download Link: https://downloadcontent.opensuse.org/repositories/devel:/RISCV:/Factory:/Contrib:/StarFive:/VisionFive2/images/openSUSE-Tumbleweed-RISC-V-JeOS-starfivevisionfive2.riscv64-2025.04.28-Build1.26.raw.xz
- Reference Installation Document:
Hardware Information
- Milk-V Mars (8GB RAM)
- A USB power adapter and A USB-A to C or C to C cable
- A microSD card
- A USB to UART debugger (e.g., CH340, CH341, FT2232, etc.)
Installation Steps
Decompress and Flash Image to microSD Card
Use xz to decompress the image, and then use dd command or balenaEtcher software to flash the image to the microSD card. (Assuming /dev/sdc is the microSD card device)
xz -d openSUSE-Tumbleweed-RISC-V-JeOS-starfivevisionfive2.riscv64-2025.04.28-Build1.26.raw.xz
sudo dd if=openSUSE-Tumbleweed-RISC-V-JeOS-starfivevisionfive2.riscv64-2025.04.28-Build1.26.raw of=/dev/sdc bs=1M status=progress
syncBoot Mode Selection
Milk-V Mars provides multiple boot modes after the hardware version V1.2, which can be configured via onboard dip switches before powering on; the board itself is also silk-screened for reference.
To boot the openSUSE image, select the microSD card boot mode (GPIO_0 = 1, GPIO_1 = 0).
Logging into the System
Log into the system via the serial port.
Default user: root
Default password: linux
Expected Results
The system should boot up normally and allow login via the serial port.
Actual Results
The system starts normally and the output is successfully viewed through the serial port.
Boot Log
Welcome to openSUSE Tumbleweed 20250527 - Kernel 6.15.0-112-default (ttyS0).
end0: 192.168.137.233 fe80::490c:948d:eb6e:60bf
wlP1p1s0:
localhost login: root
Password:
Have a lot of fun...
localhost:~ # uname -a
Linux localhost.localdomain 6.15.0-112-default #1 SMP PREEMPT_DYNAMIC Mon May 26 04:54:06 UTC 2025 (ed9faca) riscv64 riscv64 riscv64 GNU/Linux
localhost:~ # cat /etc/os-release
NAME="openSUSE Tumbleweed"
# VERSION="20250527"
ID="opensuse-tumbleweed"
ID_LIKE="opensuse suse"
VERSION_ID="20250527"
PRETTY_NAME="openSUSE Tumbleweed"
ANSI_COLOR="0;32"
# CPE 2.3 format, boo#1217921
CPE_NAME="cpe:2.3:o:opensuse:tumbleweed:20250527:*:*:*:*:*:*:*"
#CPE 2.2 format
#CPE_NAME="cpe:/o:opensuse:tumbleweed:20250527"
BUG_REPORT_URL="https://bugzilla.opensuse.org"
SUPPORT_URL="https://bugs.opensuse.org"
HOME_URL="https://www.opensuse.org"
DOCUMENTATION_URL="https://en.opensuse.org/Portal:Tumbleweed"
LOGO="distributor-logo-Tumbleweed"
localhost:~ # cat /proc/cpuinfo
processor : 0
hart : 1
isa : rv64imafdc_zicntr_zicsr_zifencei_zihpm_zaamo_zalrsc_zca_zcd_zba_zbb
mmu : sv39
uarch : sifive,u74-mc
mvendorid : 0x489
marchid : 0x8000000000000007
mimpid : 0x4210427
hart isa : rv64imafdc_zicntr_zicsr_zifencei_zihpm_zaamo_zalrsc_zca_zcd_zba_zbb
processor : 1
hart : 2
isa : rv64imafdc_zicntr_zicsr_zifencei_zihpm_zaamo_zalrsc_zca_zcd_zba_zbb
mmu : sv39
uarch : sifive,u74-mc
mvendorid : 0x489
marchid : 0x8000000000000007
mimpid : 0x4210427
hart isa : rv64imafdc_zicntr_zicsr_zifencei_zihpm_zaamo_zalrsc_zca_zcd_zba_zbb
processor : 2
hart : 3
isa : rv64imafdc_zicntr_zicsr_zifencei_zihpm_zaamo_zalrsc_zca_zcd_zba_zbb
mmu : sv39
uarch : sifive,u74-mc
mvendorid : 0x489
marchid : 0x8000000000000007
mimpid : 0x4210427
hart isa : rv64imafdc_zicntr_zicsr_zifencei_zihpm_zaamo_zalrsc_zca_zcd_zba_zbb
processor : 3
hart : 4
isa : rv64imafdc_zicntr_zicsr_zifencei_zihpm_zaamo_zalrsc_zca_zcd_zba_zbb
mmu : sv39
uarch : sifive,u74-mc
mvendorid : 0x489
marchid : 0x8000000000000007
mimpid : 0x4210427
hart isa : rv64imafdc_zicntr_zicsr_zifencei_zihpm_zaamo_zalrsc_zca_zcd_zba_zbb
localhost:~ #Test Criteria
Successful: The actual result matches the expected result.
Failed: The actual result does not match the expected result.
Test Conclusion
Test successful.
Source: Support Matrix