RuyiSDK System Version
23.05
Status
BASIC
System Variant
VizOS
Last Update
2025-03-31
OpenWrt Milk-V Duo Test Report
Test Environment
Operating System Information
- Source Code Link: https://github.com/draftbottle/VizOS
- Reference Installation Document: https://community.milkv.io/t/milk-v-duo-openwrt/2399
Note: This image is provided by community developers and is not an official image.
Hardware Information
- Milk-V Duo 64M
- A USB Power Adapter
- A USB-A to C or USB C to C Cable
- A microSD Card
- A USB to UART Debugger (e.g., CH340, CH341, FT2232, etc.)
- Three Dupont Wires
- Milk-V Duo with necessary header pins pre-soldered for debugging
- Optional: Milk-V Duo IOB (Baseboard)
Installation Steps
Environment Setup
Install some necessary packages:
sudo apt update && sudo apt install -y ack antlr3 aria2 asciidoc autoconf automake autopoint binutils bison build-essential bzip2 ccache cmake cpio curl device-tree-compiler fastjar flex gawk gettext gcc-multilib g++-multilib git gperf haveged help2man intltool libc6-dev-i386 libelf-dev libglib2.0-dev libgmp3-dev libltdl-dev libmpc-dev libmpfr-dev libncurses5-dev libncursesw5-dev libreadline-dev libssl-dev libtool lrzsz mkisofs msmtp nano ninja-build p7zip p7zip-full patch pkgconf python3 python3-pip libpython3-dev qemu-utils rsync rename scons squashfs-tools subversion swig texinfo uglifyjs upx-ucl unzip vim wget xmlto xxd zlib1g-dev genimage libconfuse2 genext2fsThe package genimage is provided in Ubuntu 24 or later. If you are runnig earlier versions, you can download it from this URL and install it manually.
Install the host tools:
wget https://sophon-file.sophon.cn/sophon-prod-s3/drive/23/03/07/16/host-tools.tar.gz
tar -xzf host-tools.tar.gz
sudo mv host-tools /optDownload and Compile
# pull source code
git clone -b vizos --single-branch --depth=1 https://github.com/draftbottle/VizOS.git feeds-vizos
git clone https://github.com/draftbottle/istoreos.git --single-branch --depth=1
# link feeds-vizos to openwrt
echo "src-link vizos ${PWD}/feeds-vizos" >> istoreos/feeds.conf.default
cd istoreos
cat feeds.conf.default
# install dependencies
./scripts/feeds update -a
./scripts/feeds install -a
./scripts/feeds install -f sophgo
./scripts/feeds install -f uboot-sophgo
# start compiling
cp ../feeds-vizos/configs/cv180x-config .config
make -j$(nproc) || make package/feeds/vizos/uboot-sophgo/compile V=s
make -j$(nproc) V=sIf built successfully, you can find the image file milkv-duo.img in the istoreos/bin/targets/sophgo/cv180x/ directory.
Using dd to Flash the Image to the microSD Card
cp ./istoreos/bin/targets/sophgo/cv180x/milkv-duo.img ./
dd if=milkv-duo.img of=/dev/sdx bs=1M status=progressLogging into the System
Logging into the system via the serial port.
Expected Results
The system boots up normally and allows login through the serial port.
Actual Results
The system boots up normally and login through the serial port is successful.
Boot Log
BusyBox v1.36.1 (2024-09-01 11:40:10 UTC) built-in shell (ash) Powered by OpenWRT ------------------------------------------------------- iStoreOS 23.05-SNAPSHOT, r0-5737568 ------------------------------------------------------- 执行. ./root/network-init.sh一键网络配置(非必须) ------------------------------------------------------- root@iStoreOS:/# uname -a Linux iStoreOS 5.10.4 #0 Sun Sep 1 11:40:10 2024 riscv64 GNU/Linux root@iStoreOS:/# cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdvcsu mmu : sv39Screen recording (From flashing image to login):
Test Criteria
Successful: The actual result matches the expected result.
Failed: The actual result does not match the expected result.
Test Conclusion
Test successful.
Source: Support Matrix